Oil-Lubricated Vacuum Pump in UAE

Oil-Lubricated Vacuum Pump in UAE

Oil-Lubricated Vacuum Pump in UAE

Request For Quotation

Company Overview:


IVC Pumps Pvt. Ltd. Is a Manufacturer, Supplier, and Exporter of Oil-Lubricated Vacuum Pump in UAE.

Our Headquartered in Ahmedabad, Gujarat, India.

An oil-lubricated vacuum pump is a type of pump that uses oil as a lubricant and sealant to generate a vacuum.

Industries use these pumps widely where they require high performance and deeper vacuum levels.

The oil plays a crucial role in sealing the internal components, reducing friction, and enhancing efficiency by ensuring smoother operation and maintaining a strong vacuum.

How an Oil-Lubricated Vacuum Pump Works:


In an oil-lubricated vacuum pump, the oil serves several purposes. It lubricates moving parts to reduce wear, acts as a coolant to prevent overheating, and seals gaps between the rotating parts and the chamber walls to enhance vacuum efficiency.

Working Process:


Air Inlet: When the pump operates, air enters through the inlet port.
Compression: As the rotor spins, the air is trapped in chambers between the rotor and the stator. The rotor’s movement compresses the air.
Oil Lubrication and Sealing: The oil creates a seal around the rotating components and fills small clearances to prevent air from escaping, ensuring a more efficient vacuum.
Exhaust: The compressed air is expelled through the exhaust port, and the oil is separated and recirculated back into the system.

Types of Oil-Lubricated Vacuum Pumps:


Rotary Vane Vacuum Pump
Piston Vacuum Pump
Rotary Screw Vacuum Pump

IVC Pumps Pvt. Ltd. Is an Exporter of Oil-Lubricated Vacuum Pump in UAE including locations like Dubai, Abu Dhabi, AI Ain, Sharjah, Umm Al Quwain, Ras Al-Khaimah, Ajman, Fujairah, Mina Jebel Ali, Dibba Al-Fujairah, Fujairah, Al Ruways, Al Jazirah Al Hamra, Hatta, Jebel Ali, Ruwais, Ajman,
Fujairah, Umm Al Quwain, Kalba.

For more information and inquiries, feel free to contact us.

working principle

The Vacuum Pump of the IVOL Series are Single Stage, Oil Lubricated Rotary Vane Vacuum Pump with Oil Re-Circulation System. The Lubricant is rated for continuous operation at high intake pressure so that pump may be used in a versatile manner in most rough Vacuum Application. They are used for Suction of air also in presence of water vapour and for continuous industrial use.

Technical Specifications

MODELMAX. VACUUM MBAR(TORR)MAX. CAPACITYOIL CAPACITY ( LTRS )
REQ. MOTOR ( KW / HP )
MOTOR SPEED
IVOL - 200.5 (0.3)2010.5 / 0.751450
IVOL - 400.5 (0.3)4020.75 / 11450
IVOL - 650.5 (0.3)652.51.5 / 21450
IVOL - 1000.5 (0.3)10032.2 / 31450
IVOL - 1500.5 (0.3)15043.7 / 51450
IVOL - 3000.5 (0.3)30085.5 / 71450

material of construction

  • Housing: The pump housing, typically made of cast iron or aluminum alloy, forms the main body of the pump. It contains the internal components and provides structural support.
  • Rotor: The rotor is a central component of the pump and is mounted on a shaft connected to a motor. It typically consists of multiple vanes (usually made of carbon or composite materials) that are evenly spaced around the circumference of the rotor.
  • Vane Sliding Mechanism: Each vane is mounted on a slotted rotor, allowing it to slide in and out as the rotor rotates. This sliding mechanism creates the pumping action by trapping and compressing gas between the vanes and the housing.
  • features

  • High pumping speed over the range of absolute pressure 1000 mbar – 0.5 mbar
  • High water vapour tolerance and low noise level
  • No pollution
  • Air Cooled
  • Built in Anti Suck-Back System
  • Easy Maintenance.
  • Application

    Get in touch with us to
    find out more about our offerings.

    Call us :

    +91 9904707781
    +91 9904707785

    Email us :

    ivc@ivcvacuumpumps.com